Maxum Operation with GCP Level 1 - US

This course covers operations, setup, and calibration of the Maxum Gas Chromatograph, an overview of the Maxum GCP workstation software. (GCP replaces both System Manager and EZChrom). This course can be taught at the customer`s site.

Training type: Scheduled

Start date: Jun 3, 2024

End date: Jun 6, 2024

Duration: 4

Location: Houston, United States of America

Description: Course code: MAXGCP1. List price: $3,000 per student. This course covers operations, setup, and calibration of the Maxum Gas Chromatograph, an overview of the Maxum GCP workstation software. (GCP replaces both System Manager and EZChrom). This course can be taught at the customer`s site and customized to meet the customer`s needs. With advance notice, customer specific applications can be taught.

Objective: Upon completion of this course, the student shall be able to: • Perform basic maintenance on the Maxum • Balance the carrier gas flows. • Setup the analyzer valve timing • Setup the Electronic Pressure Controller (EPC) • Access Maxums using GCP - Network View • Adjust peak times with the GCP • Calibrate the analyzer with GCP • Backup and Restore the analyzer database

Audience: This course uses Gas Chromatograph Portal (GCP) workstation software and is intended for individuals responsible for maintaining the Maxum Gas Chromatograph and for users who need to perform routine maintenance and calibration. STRONG PREREQUISITE: Basic Chromatography skills.

Pre-requisites: Introduction to Process Gas Chromatography OR Online Instructor-led Training-Introduction to Process Gas Chromatography

Registration information:

Thank you for your interest.

Please send your enrollment information to AS.NA.Maxum.Training@valmet.com with below required information.

• First Name & Last Name

• Company name & address

• Student Email Address

• Student Phone number

• PO number

• The class ID and start date you would like to enroll.

 

Payment

Currently credit card payment is not available, but it is under development. Please send PO to the email at AS.NA.Maxum.Training@valmet.com.

PO issue-to:

Our legal entity name is “Valmet, Inc.” and DBA (Do Business As) “Gas Chromatography System Maxum LLC”.

Gas Chromatography System Maxum LLC is our business unit under Valmet, Inc.

Class status:

Our training schedules are dynamic and are updated daily. We are unable to save seats without the registration process being completed and order payment confirmed. Classes are subject to cancellation. The class status will be confirmed 2 weeks before class start date, either confirm or cancel based on the enrollment qty.

Cancellation Policy:

The following is the cancellation policy for open enrollment classes:

  1. You will be charged 75% of the total price (tuition and add-ons) for cancellations made within 5 business days of the start of class.
  2. You will be charged in full (tuition and add-ons) for students who fail to show up for class without prior notification or for cancellations made on the start date of the class.


 

Thanks again for your interest.

Best regards.

Valmet GC Maxum Training Department

Deadline for registration: May 27, 2024

Tuition fee: 3000 USD per student

Agenda:

Topics:

1.Maxum System Overview

2.Maxum GCP Overview

3.Maxum Hardware Overview


4.Maxum Valve Maintenance

a. Model 50

b. Model 11

c. Liquid Inject


5.Maxum Detectors Maintenance

a. Flame Photometric

b. Flame Ionization

c. Thermal Conductivity


6.System Addressing

a. IP Addressing

b. SNE/Internal Bus Addresses

c. Add an I2C IO Card


7.Maxum Chromatograph Hardware

a. Oven configurations

b. Utility Requirement

c. Module Wiring/Connections


8.Parallel Chromatography

a. Applets

b. Hardware Timing

c. Flow Settings


9.GCP Method Software

a. Method Setup

b. Integration Options

c. Auto Gating

d. Named Peaks

e. Group Peaks

f. Sequences

g. Off Line Calibration


10.Color Touch Screen Control Interface Module (CIM)

a. HMI Menus

b. Menu Navigation

c. Alarms

d. Basic HMI Operations

e. Modify the Chromatograph Method


11.Labs

a. Save Database Tables

b. Analyzer Calibration using CIM

c. Analyzer Calibration with GCP

d. Modify Methods

e. Set Valve Timing

f. Run Setup and Main Detector Chromatograms

g. Set Flows

h. Perform Model 50 Valve Maintenance

i. Identify Maxum Hardware Components

Thank you for contacting us!

All messages from this form are processed. We will get back to you as soon as possible.

Learning services team