- Distributed control system
-
Industrial applications
- For Pulp
- For Board & Paper
- For Tissue
- For Energy
- For Marine
- For Alternative fuels
- Quality management
-
Analyzers and measurements
-
Analyzers
- Brown Stock Quality Analyzer
- Chip 'n' Bark Moisture Analyzer
- Recovery Liquor Analyzer
- Dirt Count Analyzer
- Fiber Image Analyzer
- Kappa Analyzer
- Paper Lab
- MR Moisture
- Pulp Expert
- Fiber Furnish Analyzer
- Retention Measurement
- Stand-Alone Retention Control
- Wet End Analyzer
- Corrosion Reduction Analyzer
- Cooking Liquor Analyzer
- Inline sensors
- Samplers
- Consistency
- Conductivity
- Boiler diagnostics systems
- Wastewater
- Vibration
-
Analyzers
- Condition monitoring
- Industrial Internet
- Automation services
- Automation
- Analyzers and measurements
- Conductivity
- Inline Concentration Measurement
- Nitric acid measurements
Nitric acid (HNO3) concentration measurements
The concentration of Nitric acid (HNO3) is calculated by measuring the conductivity and temperature of the acid. Valmet offers readymade concentration measurement recipes for various Nitric acid concentrations. The sensors are readily calibrated and the cell constant is stored in the sensor memory. All you have to do is install the sensor in the process pipe and power up the measurement.
Valmet Concentration measurement is maintenance free and accurate thanks to 4 electrode technology. The sensors are designed to withstand rapid temperature changes have a long lifetime even in the most demanding applications.
Nitric acid concentration measurements
Solution | Measuring range | Temperature |
HNO3 | 0-20 % | 0-90 °C |
HNO3 | 50-75 % | 0-65 °C |
HNO3 | 0-25 % | 0-40 °C |