Metso to deliver freeze-proofed crushing and screening plants to Antarctica – operating temperature as low as -40 °C

Metso to deliver freeze-proofed crushing and screening plants to Antarctica – operating temperature as low as -40 °C 

Metso Corporation’s press release on November 5, 2019 at 11:00 EET. 

Metso is delivering three Lokotrack® crushing and screening plants retrofitted for extreme cold for the reconstruction of the U.S. National Science Foundation’s (NSF) McMurdo research station in Antarctica. The equipment enables crushing in temperatures as low as -40 °C. 

McMurdo Station, located on an island in the Ross Sea, is the U.S. Antarctic Program’s logistics hub and the largest of the three stations that the U.S. operates in Antarctica. McMurdo is being rebuilt under the Antarctic Infrastructure and Modernization for Science (AIMS) project, a long-range initiative to upgrade the station to make it logistically and energy efficient.

Metso’ equipment will be used for three years in crushing the ground materials for the new buildings. All in all, this will amount to more than 126,000 cubic meters of aggregates.

In the extreme conditions of Antarctica, the equipment can only be used during the Southern Hemisphere summer, which lasts from October to April. The hard basalt to be crushed will come from an area near the station.

“Metso’s solution offered the best value” 

The Lokotrack equipment was procured by Leidos, the NSF’s prime contractor for the Antarctic Support Contract as well as the AIMS project. The seller was Wagner Equipment, a Metso distributor in the United States.  

“After a comparison of several equipment manufacturers, Metso and Wagner offered a freeze-proofed crushing solution with the best value,” said David DesAutels, Leidos Antarctic Support Contract fleet analyst. “The equipment, specifically designed for cold conditions, will be maintained by personnel with close proximity in New Zealand.

Development work for protection against cold, packaging materials with consideration for the environment 

The equipment to be delivered to Antarctica – the Lokotrack LT106 jaw crusher plant, the LT200HP cone crusher and the ST3.8 mobile screen – are all retrofitted for extreme cold. In addition, the mechanics at Metso’s Technology Center for track-mounted equipment in Tampere, Finland have also developed additional protections for the equipment.  

“Every part sensitive to cold has been fitted with immersion heaters and extra insulation. The selected oils and other fluids are suitable for the Antarctic climate and the specially manufactured conveyor belts run even in extremely cold weather,” says Marko Salonen, Project Manager at Metso’s Aggregates Equipment business area. 

“Alongside the equipment, we also prepared the maintenance and spare parts service in such a way that everything conceivable can be anticipated and serviced independently on site. Even the packaging materials were chosen in a way that ensured that nothing unnecessary would be transported to the unique Antarctic environment,” adds Salonen. 

Production target 250 tons of crushed stone an hour 

As they oversee the AIMS project, Leidos intends to operate the machines for two months after their arrival in 2020, before ceasing operations for the winter.  

“We aim to work 16 hours a day and produce 250 tons of 63 mm crushed stone per hour,” said Jeffrey Huffman, Leidos Antarctic Support Contract operations manager. “We also want to include some degree of fines, to gain more compact material for the buildings’ foundations.” 

Almost around the world to reach Antarctica    

The crushing plants began their long journey, spanning nearly the entire globe, at the beginning of October. From Finland, the equipment was shipped to Germany and from there to Port Hueneme, California, from where it will travel onward to Antarctica via Christchurch, New Zealand. 

The final leg of the journey will be led by an icebreaker, followed by two vessels carrying a total of 35 earthwork machines. The cargo is expected to reach the McMurdo harbor at the beginning of February next year. 

Metso is a world-leading industrial company offering equipment and services for the sustainable processing and flow of natural resources in the mining, aggregates, recycling and process industries. With our unique knowledge and innovative solutions, we help our customers improve their operational efficiency, reduce risks and increase profitability. Metso is listed on the Nasdaq Helsinki in Finland and had sales of about EUR 3.2 billion in 2018. Metso employs over 14,000 employees in more than 50 countries.  
metso.com, twitter.com/metsogroup 

Further information:  

Marko Salonen, Project Manager, Aggregates Equipment, Metso, tel. +358 40 515 9853, email: marko.salonen@metso.com  

Helena Marjaranta, VP, Communications and Stakeholder Relations, Metso Corporation, tel. +358 20 484 3212, email: helena.marjaranta@metso.com    
  

Caption: David DesAutels (left) of Leidos, Rick Sack of Wagner Equipment and Marko Salonen of Metso discussing the equipment inspection. 

Caption: The international team which inspected the equipment at the Tampere factory found the Lokotracks ready for their journey to Antarctica.  

Caption: The freeze-proofed Lokotrack LT106 jaw crusher plant will be crushing icy basalt for the extension of the McMurdo research station as of next February.