Integrated water purification for water treatment
Wet exhaust and process gas cleaning systems require the use of techniques that separate the emissions absorbed by the liquid. Whether it is a pre-cleaning, main cleaning or even an conductive final cleaning, these methods serve to reduce disposal costs or to avoid them altogether. As a result, water treatment systems are often an integral part of exhaust gas purification systems.
Optimal adaptation
Turn-key solutions
Integrated systems
Reduction of residual and waste materials
Recovery of production materials
Areas of application
- Wet electrofilter
- Wet absorber
- Cooling water circuits
Multi-stage water treatment
Due to the process, a multi-stage water treatment is sometimes necessary, whereby possibly additional sorption or absorption substances and chemical solutions are dosed.
- Rotation filter
- Flotation system
- Backwash filter
- Rotation filter
- Water biology with membrane filter
- Cross-flow systems
Our references
Case: FINSA Santiago
Santiago de Compostela, Spain
Waste gases from chip drier
Start-up: 2020
Process:
- Aerosols
- Hydrocarbons solids
- Formaldehyde
- Odours from chip dryer
System:
- Quench
- Wet Absorber
- Vertical Wet Type ESP
Crude Gas m³/h: 716,700
Operation Temp.°C: 69.0
Case: Egger Panneaux & Décors
Rambervillers, France
Waste gases from chip drier
Start-up: 2018
Process:
- Aerosols
- Hydrocarbons solids
- Formaldehyde
- Odours from chipboard press and diagonal sawing machine
System:
- High-Performance Extraction System with Quench
- Wet Absorber
- Vertical Wet Type ESP
Crude Gas m³/h: 115,000
Operation Temp.°C: 32.0
Case: SWISS KRONO Żary
Żary, Poland
Waste gases from MDF fiber drier
Start-up: 2018
Process:
- Particles
- Formaldehyde
- Hydrocarbons and VOCs from MDF dryer
System:
- Quench
- Wet Absorber
- Vertical Wet Type ESP with heat extraction and biological water treatment
Crude Gas m³/h: 870,00
Operation Temp.°C: 52.0/35.0
Case: Tanne (Forte) Suwałki
Suwałki, Poland
Waste gases from chip drier
Start-up: 2017
Process:
- Aerosols
- Hydrocarbons solids
- Formaldehyde
- Odours from chip dryer
System:
- Quench
- Wet Absorber
- Vertical Wet Type ESP with heat extraction
Crude Gas m³/h: 328,732
Operation Temp.°C: 72.0
Case: IKEA Industry Novgorod
Novgorod, Russia
Waste gases from chip press
Start-up: 2015
Process:
- Aerosols
- Hydrocarbons solids
- Formaldehyde
- Odours from a press
System:
- Quench
- Wet Absorber
- Vertical Wet Type ESP
Crude Gas m³/h: 105,000
Operation Temp.°C: 36.0
Case: Fritz Egger GmbH
St. Johann, Tirol, Austria
Waste gases from 2 chip driers and press
Start-up: 2009
Process:
- Aerosols
- Hydrocarbons solids
- Formaldehyde
- Odours from chip dryer and press
System:
- Quench
- Wet Absorber
- Vertical Wet Type ESP with devaporization and heat recovery system (three part system)
Crude Gas m³/h: 304,000
Operation Temp.°C: 71.0
Our expertise is at your service
Our focus is to bring your performance forward. Our expertise in sustainable energy production is at your disposal. Get in touch with our specialists through your local Valmet office, or the link below.
Contact us
