Valmet to supply turbine automation technology for an E.ON-owned CHP plant in Malmö, Sweden

Valmet Oyj's trade press release on June 20, 2018 at 1:00 p.m. EET

Valmet has begun phase two delivery of its turnkey automation solution to the Heleneholmsverket (HVK) combined heat and power plant in Malmö, Sweden. The plant is owned and operated by E.ON. Valmet's delivery scope will include system software and hardware, field engineering and installation. This is Valmet's first radial steam turbine automation retrofit project in Sweden.

E.ON is the main heating energy provider for private, business and governmental sectors in Malmö, with a total district heating network of approximately 620 km. The company's HVK cogeneration plant is equipped with four boilers and two steam turbines, G11 and G12, with a capacity of producing 45 MW and 95 MW of electricity respectively. Total power capacity of the HVK cogeneration plant is over 500 MW. The plant today uses mostly natural gas to fire its boilers, but it can also run on oil and diesel.

First phase completed successfully

After the first phase of the multistage automation retrofit project was successfully completed last autumn, the second phase of the project began recently. Commissioning of the second phase is scheduled for completion in autumn 2018. The third phase will be implemented during the summer and autumn of 2019.

Valmet's delivery scope in 2017 focused mainly on the G11 unit and consisted of a turbine controller with overspeed protection, including the installation of six new sensors to protect the unit against fatal damages. This year, the delivery project will encompass new vibration protection sensors for both the G11 and G12 turbines, plus a new turbine controller cabinet for the G12. The delivery planned for 2019 should consist of a complete turbine controller for the G12 unit, as well as an electro-hydraulic protection upgrade for both turbines.

Choice based on technology, know-how and cost

"Our cooperation with E.ON in started in the late 2016 and quickly gained a positive momentum," comments Eetu Oittinen, Product Manager, EPS Turbine Automation, Valmet. "We listened to the customer's goals and requirements, did the site inspection and made an offer based on the given specifications. Both the reliability of our technical solution and the cost of delivery answered the customer's needs, and so our long-term partnership started."

"Today, we are only halfway through this forward-looking automation upgrade project, but we are glad to see that the solution is already opening many new opportunities for E.ON in Sweden," says Oittinen.

Thomas Winemar, Sales Manager for Valmet in Sweden, adds: "Valmet's extensive process knowledge was one crucial factor for E.ON when selecting us as their main automation solution supplier at HVK. We know the process and were therefore able to offer a viable solution based on decades of our experience with similar projects. And the plant's management highly appreciated this during the first phase of delivery."

About E.ON

E.ON is an international private energy company headquartered in Essen, Germany, which focuses on energy networks, customer solutions, and renewable energies. As one of Europe's largest energy companies, E.ON plays a leading role in shaping a clean, digital, decentralized world of energy. To this end, the company develops and sells products and solutions for private, commercial and industrial customers. In fiscal 2017, 40,000 employees generated sales of €38 billion. Around 32 million customers purchase electricity, gas, digital products or solutions for electric mobility from E.ON.

Valmet DNA operation station

VALMET
Corporate Communications

For further information, please contact:
Eetu Oittinen, Product Manager, EPS Turbine Automation, Valmet, Tel.+358 50 420 1280
Thomas Winemar, Sales Manager, Automation Business Line, Valmet, Tel.+46 76 639 69 49

Valmet is the leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. We aim to become the global champion in serving our customers.

Valmet's strong technology offering includes pulp mills, tissue, board and paper production lines, as well as power plants for bioenergy production. Our advanced services and automation solutions improve the reliability and performance of our customers' processes and enhance the effective utilization of raw materials and energy.

Valmet's net sales in 2017 were approximately EUR 3.1 billion. Our more than 12,000 professionals around the world work close to our customers and are committed to moving our customers' performance forward - every day. Valmet's head office is in Espoo, Finland, and its shares are listed on the Nasdaq Helsinki.

Valmet to supply turbine automation technology for an E.ON-owned CHP plant in Malmö, Sweden

Local websites