Valmet Twister Hydrocyclone

Raising cleaning performance to a new level while utilizing less energy

An optimal solution for high-consistency, high-demand hydrocyclone applications. This two-stage hydrocyclone features three forward hydrocyclones in one, single unit. At its heart is our mid-cone dilution technology. It re-energizes the stock, minimizing fiber thickening, resulting in higher end-product quality and reduced operational disruptions. The Valmet Twister Hydrocyclone can operate at over 2% consistency, with superior cleaning performance.

Superior cleaning

Energy efficient

Cost-effective

Features

  • Up to 2% feed consistency operation with comparable
    cleaning performance in conventional hydrocyclones at 1%
  • Superior cleaning performance over the entire operating
    consistency range
  • Up to 50% lower applied energy
  • Considerably lower reject rates than conventional
    hydrocyclones
  • Patented twin wall design

Mid-Cone Dilution Technology

The patented mid-cone dilution technology re-energizes the stock while providing accurate dilution minimizing fiber thickening. The midcone dilution is located at the base of the first stage Valmet Twister Hydrocyclone cone, just before the stock enters the unit’s 2nd stage.

This mid-cone dilution technology enables the Valmet Twister Hydrocyclone to have an elongated cone section for higher separation efficiencies without the need to operate at an elevated pressure drop.

Reject Dilution Technology

The mid-cone dilution technology takes bottom vortex dilution technology one step further by diluting the stock and utilizing the added energy in the dilution water to reenergize the stock. Bottom vortex dilution devices do not fully utilize dilution water energy as does the mid-cone dilution technology.