Search results

Reel primary arm synchronization avoids bottom jumbo reel losses

If you suspect that you are losing excessive paper on the bottoms of your jumbo rolls, the primary arms may be the culprit. Primary arm synchronization is critical for the reel to function properly during turn-up situations.

Suction roll bearing failure - monitoring and lubrication tips

One of the most sensitive components of the roll, the internal bearing is difficult to maintain and unforgiving when it fails. Accelerometers are an effective means of monitoring and predicting suction roll bearing failure.

Improved rope runs with minimum changes, two-machine case study

In this case study, two paper machines were rebuilt to improve their rope runs. The rope systems were made much more reliable by making a minimum of changes. Valmet changed the transfer philosophy from tear-off to tail-release. The results were less fouling of return runs and less debris.

Field services for optimized reliable stock preparation

Maintenance of stock preparation and approach flow systems optimizes their utilization rate and reliable operation, and minimizes unplanned shutdowns.

How to troubleshoot calender roll heat transfer problems

The following were noted during installations and are common installation troubles. Read them carefully to rectify or avoid them during your installation.

Uhle boxes - care, handling, cleaning, maintenance and adjustment

Reliable operation of a press section uhle box requires attention to care and handling, as well as routine maintenance. Blades and covers are susceptible to costly damage if improperly handled and maintained.

Suction couch and press roll packing strip problems, a case study

A paperboard mill suffered from unexplained grooving and chipping in thesuction roll sealing strips. The fog shower was identified as a culprit.

Reel maintenance: on-the-run monitoring, checks and consumables

Many reel service actions and adjustments are common to all paper machine reels. This article reviews on-the-run (OTR) monitoring of the reel, as well as long-term (20 year) checks such as screw torques and critical seam weldments. Consumables must be inspected and replaced as needed, especially actuators and cylinder seals.

LWC machine forming fabric MD ridging problem, a case study

Distortions in fabrics, such as ridges, cause basis weight profile problems. In this case study, the culprit was found to be a tiny speck of rust - which created a large and expensive problem.

Hydraulic safety - 5 tips for before, during & after maintenance

Hydraulic maintenance should be performed by knowledgeable, trained technicians. Here are some tips for safely and efficiently working on hydraulic systems.