A three-day course designed to give plant personnel the ability to identify malfunctions of the D/3® Distributed
Control System using graphics and console displays.
Training type: Scheduled
Start date: Jul 29, 2024
End date: Jul 31, 2024
Duration:
3 days
Location: Aiken, SC, United States
Description:
A three-day course designed to give plant personnel the ability to identify malfunctions of the D/3® Distributed
Control System using graphics and console displays. The PCM 4100 and 4200 hardware and 8000 I/O hardware
are covered in lecture as well as hands-on experience in troubleshooting and repair. This course is specific to D/3® Distributed Control Systems running on software versions 12.2 and higher. Students should carefully check their D/3® software version and system configuration before enrolling in this course.
Objective:
Learn basic operation of PCM 4100/4200 hardware and 8000 I/O devices. Diagnose system malfunctions and make repairs such as hardware setup and fuse and board replacement.
Audience:
Automation.
Pre-requisites:
Familiarity with digital multimeters and basic process instrumentation.
Registration information:
Location
Aiken Training Center
139 Darlington Drive, Suite 200
Aiken, SC 29803
Cost
$2,620 USD/person
Course tuition includes all course materials and documentation. Course fees do not include travel, meals, accommodations, or other travel related expenses. As a courtesy, Valmet will provide lunch for one day a week during the classes at all of our training facilities.
Prices listed are valid for the period of time for which the schedule is in effect. Course tuition can be paid with a purchase order, check or credit card. Purchase orders and checks should be mailed to the following address, prior to the start of the course.
Valmet, Inc.
Educational Services
11425 Cronhill Drive
Owings Mills, MD 21117
Cancellations and Substitutions
Course registrations can be cancelled with a full refund up to 10 working days prior to the starting date of the course. Cancellations received within fewer than 10 working days before the scheduled start date of the course, will be subject to a late-cancellation fee of 25% or full tuition. A fee equivalent to the cost of the course, will be charged on cancellations on or after the scheduled start date or no-show. Valmet's Educational Services has the right to cancel courses two weeks prior to the start date that do not meet minimum enrollment standards.
Hotel Accommodations
Augusta Bushfield Airport is about a thirty-minute drive from Valmet’s Aiken Training Facility and Columbia Airport is about an hour away. Suggested hotels:
Hilton Garden Inn
350 Eastgate Drive
Aiken, SC 29803
803.641.4220
Country Inn and Suites
3270 Whiskey Road
Aiken, SC 29803
803.649.4024
Deadline for registration:
Tuition fee: $2,620 USD/person
Agenda:
Overview of D/3® Operation and Terminology Operator Console Displays and Alarm Interpretation PCM 4100/4200 Micro Configuration 8000 I/O Rack Configuration and Operation 8000 I/O Module Replacement Power Supply Indications Hands-on Troubleshooting Using Displays, Indicators and Meters D/3® Ethernet Diagnostic Tools Controlling Analog and Digital EPNs
