PeriVapor brings greater profitability to Hansol HomeDeco, South Korea

This means that now the mill can return recycled steam to the process, thus reducing the need for fresh steam generated in the incinerator where they burns biomass (waste wood). What’s more, the “saved” steam can be used to feed the steam turbine to produce “green” electricity that can be sold to the grid at an advantageous price.

The project

Hansol is very pleased with the installation and commissioning of the machine. In fact, they would like to see Valmet continue to develop new products enabling increased profitability. The mill is currently considering installation of another PeriVapor on its second line for Surface fiber production to further increase competitiveness.

Results

• EUR 1600 per day in savings
• About 60 tons of steam is recycled per day using the Valmet PeriVapor
• The temperature in the dryer has decreased by about 5 degrees.

No changes have been noted in the quality of the final product. Neither has any increase in resin consumption been observed. More than likely it has decreased. An investigation is ongoing at the mill.

Facts

• MDF plant started in 1995
• 2 MDF lines. Core and surface.
• Fiber production 15 t/h
• 350,000 m3t/y Press length 38 m
• 10% Flooring, 40% Interior, 50% Furniture
• 2-3 different products per day.

From left to right are: Choi Jong-Hwan, Mill site mgr at Valmet, Ahn Bok-Gyu, Team mgr at Hansol; Jo Hyung-Jun, Project team at Hansol and Mattias Grannas, Product Specialist, Mechanical Fiber at Valmet.

For more information contact:
Mattias Grannas
Product Specialist, Mechanical Fiber
mattias.grannas@valmet.com
+46 70 663 40 49