Customer references

Reference card 12.04.2024

Laura Bassi and Valmet: exploring better data management

Valmet replaced the automation system with Valmet DNA and supplied its Industrial Internet to the scientific vessel Laura Bassi.

Automation Industrial Internet Digitalization Industrial internet for Marine Marine

Reference card 19.03.2024

Cake solids measurement elevates dewatering control

JEA’s Buckman Wastewater Treatment Plant, in Jacksonville, Florida, chose Valmet Dry Solids Measurement (Valmet DS), installed on the dewatering centrifuge, for accurate cake measurement. It’s been implemented for the plant wide mass balance control scheme.

Automation Analyzers, measurement and laboratory Wastewater measurements Valmet Dry Solids Measurement Water and wastewater Waste water plants Automation

Reference card 14.03.2024

Enhancing Boiler Maintenance: Insights from Shock Pulse Generator Installation

An installation of Shock Pulse Generators (SPGs) in a biomass boiler in Germany has yielded valuable insights into enhancing operational efficiency and reliability. See how this installation has significantly improved boiler maintenance practices in all four passes of the biomass boiler.

Improvements Safety Performance Pulp Biomass to Energy Boiler optimization Innovation Upgrades and Lifecycle

Reference card 14.03.2024

Liansheng Pulp & Paper PM 1 carton board line and PM 3 high-grade fine paperline

Valmet’s cooperation with Liansheng has continued to deepen by the start-up of carton board production line PM 1 and high-grade fine paper production line PM 3 in May 2023 in their Zhangpu site.

Coated board Printing papers Calendering Coating Coating drying Drying Hard nip calendering Process ventilation High-humidity hood Jet blade coating

Reference card 29.02.2024

Distributed Control System: Great success in competitor replacing, Indonesia

PT. Indah Kiat Pulp and Paper (IKPP) Perawang mill belongs to Asia Pulp & Paper (APP) Group, it is located in Sumatera island, Indonesia. Perawang mill has 9 paper machines in operation and produces approximately 1.2 million tons of paper and board per year.

Automation Distributed control system Board and paper

Reference card 20.02.2024

Greenpac PM 1: remote support solved energy consumption increase in dryer section

As a part of continuous remote monitoring & optimization service Valmet Performance Center supported Greenpac remotely to identify and solve energy consumption increase issue in the dryer section.

Industrial Internet for Board and Paper Remote monitoring and optimization Drying OptiRun cylinder drying Energy efficiency Board and paper Digitalization Industrial Internet Energy efficiency

Reference card 06.02.2024

SCA Ortviken pulp mill - CTMP project

The demand for newsprint and magazine paper in the world has decreased and in order to adapt to this change, SCA decided to shut down the production of newsprint and LWC at the Ortviken mill in Sweden and focus on producing CTMP pulp instead.

Baling Mechanical pulping Fiber Flash Dryer Pulp

Reference card 23.01.2024

Short lead time of Valmet SymZS Nip Roll reconditioning

Bukit Muria Jaya PM 3 press section SymZS Nip Rolls were running for more than seven years without servicing. The need for servicing was recognized, but the challenge was the lack of spare rolls. Depending on the process and/or market situation, a roll change was needed every two to four weeks. The customer therefore asked Valmet to perform roll and roll gear full reconditioning within a two-week turnaround. The Valmet Service Center in Cikarang was ready to take on the challenge, and with good ...

Maintenance Roll services Roll maintenance Availability / Reliability Maintenance efficiency Board and paper Services Availability / reliability

Reference card 23.01.2024

Stora Enso keeps seven decades old board mill competitive with automation upgrades

Stora Enso Imatra Mills has improved its BM2 line operating environment with a web-based Valmet DNA User Interface. The user interface was specifically tailored to display the most essential data based on user needs and roles, making the users’ work easier.

Automation Automation User Interface Distributed control system Coated board