By continuing to use the site, you agree to the use of cookies. You can find out more by following this link

Valmet’s Custom Spout Plug and Integrated Locking Handle

The spout deck on a recovery boiler is considered the most dangerous area for operators and one of the leading causes of recordable injuries.  To improve safety in this area, Valmet has recently developed a refractory plug that is custom shaped for the Valmet insertable smelt spout.  This new product is designed to provide a quick and reliable option for operators to intentionally terminate smelt flow to a smelt spout. 

How Does it Work?

How does the spout plug work?

The Valmet insertable refractory plug was custom designed to quickly and efficiently plug the smelt flow to a smelt spout when necessary. It works by using a high temperature rope wrapped around the plug as a gasket to create a tight seal between the metal spout and the refractory plug.

The product also includes a stainless steel locking handle integrated into the smelt spout hood enclosure which is designed to quickly install the plug at the proper elevation/alignment and to secure the plug in place to the micro-hood system. The locking handle anchors the plug in the opening with the gasket compressed so it does not unexpectedly become dislodged.

What are the benefits of the spout plug?What are the Benefits of the Spout Plug?

With the ability to quickly and safely plug a smelt spout, the ability to perform maintenance work or replace damaged shatter jet parts now becomes safer and more straightforward. When the plug is in place it is now easier to inspect and clean hood internals while the unit is online. It also allows for reducing the number of spouts in service to maintain normal smelt flow under lower operating loads. Customers already using Valmet insertable smelt spouts can purchase these plugs and locking handles as a spare part by obtaining a Valmet “starter kit” which includes all parts needed to begin using the plug.

For more information about the Valmet Custom Spout plug please contact our Smelt Spout Product Manager, Dan Morrison.