- Distributed control system
-
Industrial applications
- For Pulp
- For Board & Paper
- For Tissue
- For Energy
- For Marine
- For Alternative fuels
- Quality management
-
Analyzers and measurements
-
Analyzers
- Brown Stock Quality Analyzer
- Chip 'n' Bark Moisture Analyzer
- Recovery Liquor Analyzer
- Dirt Count Analyzer
- Fiber Image Analyzer
- Kappa Analyzer
- Paper Lab
- MR Moisture
- Pulp Expert
- Fiber Furnish Analyzer
- Retention Measurement
- Stand-Alone Retention Control
- Wet End Analyzer
- Corrosion Reduction Analyzer
- Cooking Liquor Analyzer
- Inline sensors
- Samplers
- Consistency
- Conductivity
- Boiler diagnostics systems
- Wastewater
- Vibration
-
Analyzers
- Condition monitoring
- Industrial Internet
- Automation services
- Automation
- Analyzers and measurements
- Conductivity
- Inline Concentration Measurement
- Salt [Sodium chloride (NaCl)] measurements
Salt [Sodium chloride (NaCl)] concentration measurements
The concentration of soluble salt (NaCl) is calculated using conductivity and temperature measurements. Valmet offers readily made concentration measurement recipes that show the concentration of sodium chloride (NaCl) as % or g/l. The sensors are readily calibrated and the cell constant is stored in the sensor memory. All you have to do is install the sensor in the process pipe and power up the measurement.
Valmet Concentration measurement requires only minimum maintenance and is accurate thanks to fouling resistant 4 electrode technology. The sensors are designed to withstand rapid temperature changes have a long lifetime even in the most demanding applications.
Salt [Sodium chloride (NaCl)] measurements
Solution | Measuring range | Temperature |
NaCl | 0-10 % | -5-100 °C |
NaCl | 0-200 g/l | 0-100 °C |
NaCl | 0-327 g/l | 20-100 °C |